CANVAC Q CLEAN R400 Instruction Manual download pdf (Page 110)

110  Video

2 Touch and hold [Ï] or [Ð] to adjust the audio recording level as

necessary.

As a guideline, adjust the audio recording level so that the audio level

meter will go to the right of the -12 dB mark (yellow area) only

occasionally.

3Touch [X] to lock the audio recording level at the current level.

To display the audio level indicator

Usually, the audio level indicator will be displayed only after activating

the manual adjustment of the audio recording level. You can choose to

display it also when the audio level is adjusted automatically.

NOTES

• When you are using a microphone connected to the MIC terminal

including the WM-V1 Wireless Microphone, the audio level indicator will

be displayed automatically.

• When the audio level meter reaches the red point (0 dB), the sound may

be distorted.

• If the audio level is too high and the sound gets distorted, activate the

microphone attenuator with the p > [Microphone Attenuator] set-

ting.

• We recommend using headphones to check the sound level while

adjusting the audio recording level or when the microphone attenuator

is activated.

[FUNC.] > [ä Mic. Level] > [m] (automatic) >

[Audio Level Indicator] > [X]

COPY

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 225 226

No comments

CANVAC Q CLEAN R400 Instruction Manual Page 110