CANVAC Q CLEAN R400 Instruction Manual download pdf (Page 155)

Wi-Fi Functions  155

5 Touch [Automatic] to automatically obtain an IP address.

• To assign the IP address manually, touch [Manual] and perform the

procedure in To manually assign an IP address (A 153).

• A screen to test the settings will appear.

6 Select whether to test the settings.

• You can touch [Check Current Configuration] to review the network

settings.

• If you touched [Yes], a test of the settings will be performed and a

confirmation screen will appear. Touch [OK].

7 Save the settings of the connection point.

* After touching [OK], you can review the network settings. Touch [Wi-Fi Setup]

> [Check Current Configuration] > Desired connection point ([ 1] to

[ 3]) > [Î] or [Í] > [K] three times when finished.

To manually enter a wireless access point (step 3)

Enter the details of the wireless access point.

* If you select [Open], you can select [No Encryption] or [WEP]. If you select,

[Open] > [WEP] or [Shared Key WEP], you will need to specify the WEP index

key.

NOTES

• The functions available and the setup method will vary depending on

the specifications and characteristics of the Wi-Fi network you want to

use.

• Wi-Fi functions, including connecting to a Wi-Fi network, are not avail-

able when the optional WM-V1 Wireless Microphone is attached to the

camcorder.

• When using Wi-Fi functions, wireless communication with an Eye-Fi

card is not possible.

[Yes] > [OK]* > [X]

Enter the access point’s SSID > [OK] > [OK] > Enter

the authentication/encryption method* and, if applicable,

the encryption key of the access point > [OK] >

Continue to step 5

COPY

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 225 226

No comments

CANVAC Q CLEAN R400 Instruction Manual Page 155