CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 102)

Page 100

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

Drive Roller Tracking Adjustment

There is no direct adjustment for tracking on the

drive roller end. It is self tracking by way of the v-

guide in the drive roller and tensioning system

Draper Speed

Proper draper speed is critical to the performance

of your Swather. The draper speed should be set to

match the eld speed of the swather and to deliver

the material smoothly to the center opening. The

speed of the lateral draper is controlled by an

adjustable ow control. Adjusting the ow control

will affect decks equally. The draper speed ow

control is managed from the in-cab control console.

Additional Draper Speed

When swathing, the draper speed should be set to

form a good windrow, removing material from the

cutter bar, and delivering the material smoothly to

the opening.

Experiment with various draper speeds to determine

the best swath formation for the existing cutting

conditions. It may be necessary to make further

adjustments as crop and moisture conditions

change.

Excessive draper speed will cause abnormal wear, and will shorten the service life

of the draper.

ATTENTION

Illustration A - Page 100 .

Illustration B - Page 100 .

Rotary Adjuster

Clockwise - Increase

Counterclockwise - Decrease

Adjust Draper Speed

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 102