CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 93)

Page 91

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

Reel Centering

Measure the clearance from the end shield on the reel to the crop divider on each end of the

swather. See the illustration below.

If the reel is not centered on the swather, proceed as follows:

1. Fully lower the table and reel, and engage parking brake.

2. Turn power unit off and allow all moving parts to come to a complete stop before exiting the

cab.

3. Loosen the carriage bolts that secure the reel arm braces on both ends of the reel.

4. Push the reel arms until reel is centered.

5. Tighten bolts when centered.

Illustration A - Page 91 .

Measure this Distance

Illustration B - Page 91 .

Reel Arm

Brace Bolts

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 93