CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 45)

Page 43

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

Installing the Platform Lift Needle

Valve on Power Units - A400 and

R450 Swathers

Refer to the illustrations on the next two

pages to familiarize yourself with the

locations of the components involved.

1. On the left side of the power unit at the

top of the stairs, access the compartment

door behind the cab.

2. At the front of the compartment, you will

nd two slots in the frame that will line

up with the bracket shown to the right.

Attach the bracket to the frame with two

5/16” bolts, washers and nuts. Tighten

the nuts to secure.

3. Lower the power unit lift arms to help

reduce pressure.

4. Locate the manual oat release valve and

relieve the pressure by opening the valve

(counter clockwise).

Ensure that you open the

valve prior to disconnecting

any hoses to avoid excess

spillage or potential harm

from heated oil.

WARNING

Illustration A - Page 43 .

Compartment Door

Illustration B - Page 43 .

Illustration C - Page 43 .

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 45