CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 18)

Page 16

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

Operation and Maintenance

Requirements

You are responsible for the safe operation and maintenance of your Honey Bee Swather. You must

ensure that you and anyone else, who is going to operate, maintain or work around the swather be

familiar with the operating and maintenance procedures and related safety information contained in

this manual.

Remember you are the key to safety. Good safety practices not only protect you but also the people

around you. Make these practices a working part of your safety program. Most accidents can be

prevented. Do not risk injury or death by ignoring good safety practices.

Operating instructions for this swather should be reviewed by each operator at least once a year per

OSHA regulations 1928.57. The meaning of each decal should be understood, and their locations

should be known prior to operating the swather.

General Safety

1. Maintain moving parts, hydraulics and motors clear of chaff and straw to prevent the possibility of

re.

2. Carry a multipurpose re extinguisher in the power unit and know how to use it. Check the extin-

guisher regularly and keep it fully charged.

3. Provide a rst aid kit in the cab for emergencies and know how to use it.

4. Do not wear loose clothing or jewelry around moving parts.

5. Wear appropriate protective gear. This list includes but is not limited to:

• A hard hat

• Protective shoes with slip-resistant soles

• Protective glasses or goggles

• Leather gloves

• Hearing protection

• Respirator or lter mask

6. Do not allow any one to ride on the swather while it or the windrower is in motion.

7. Make certain that the park brake is engaged, and the power unit is in neutral before starting the

engine.

8. Clear the area of bystanders, especially small children before starting the power unit.

9. Do not allow anyone to operate the swather who has not been instructed in how to operate the

machine.

10. All operators should familiarize themselves with the SAFETY section in the Power unit Operators

Manual.

11. Some pictures or illustrations in this manual may not show protective shields in place. This is done

in order to make important components visible. Make certain that all protective shields are se-

cured in place before operating the machine.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 18