CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 117)

Page 115

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

Preparing the table for further

Leveling

If the table requires further leveling, you have 3 options (found on the following pages) that can be

completed individually or in combination:

Option 1 - Remove the Transport Hitch

If the hitch end of the swather is low, this condition may be due to the weight of the hitch.

Park the windrower on a hard, level surface, and engage the park brake.

Raise the swather to the fully raised position, shut the unit down, and wait for all

moving parts to stop. Lock the platform in the fully raised position.

1. Release the safety chain from the jack storage tube, if necessary. Pull the hitch tube lock

pin, and extend the hitch tube.

2. Support the hitch, and remove the forward hitch mounting pin. Lower this end of the hitch to

the ground.

3. Position yourself under the swather near, but not below the inner end of the hitch sleeve, and

remove the pin holding the sleeve onto the strut. Allow the sleeve to drop to the ground.

4. Store the hitch components in an appropriate location.

IMPORTANT

Removing the Transport Hitch - Illustration A - Page 115 .

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 117