Page 70
Rev. 02 - 94753
Honey Bee Manufacturing Ltd.
2014 John Deere WS Swather
Operator’s Manual and Reference Guide
9. Press the Reel Speed (E) and Float Pressure (F) buttons simultaneously to store the code and
move to the next step.
10. The Function Selected display (A) will now have the lower right quadrant highlighted. Press the
Ground Speed (C) or the Engine Speed (D) button incrementally to adjust this reading to “26” for
units prior to the 2002 model year. Beginning with the 2002 model year, this number will be “24.5”
to reect the change in nal drive ratios.
11. Press the Reel Speed (E) and Float Pressure (F) buttons simultaneously to store this code and
move to the next step. The Function Selected display (A) will now have the lower left quadrant
highlighted. The number of pulses per engine revolution will be shown on the digital display (H).
12. Press the Ground Speed (C) or the Engine Speed (D) button incrementally until the display reads
“30”.
13. Press the Reel Speed (E) and Float Pressure (F) buttons simultaneously to store this code.
13. Turn the key to the “OFF” position to exit the setup mode. Calibrate the Hydraulic Pump.
Comments to this Manuals