CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 110)

Page 108

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

Knife Drive/Knife Head

Proper maintenance of the knife drive and the knife

head is critical to the performance of your swather.

Check the knife drive hold down bolts daily. Tighten

to the specied torque as needed.

Check the knife head bearing daily. If the bearing is

loose, check the tightness of the bolt. If the bolt is

tight, check the condition of the bearing and sleeve.

If any parts are defective, replace them immediately

to avoid damage to the drive.

Check the knife head locking bolt and the socket

head cap screws daily. Rotate the knife drive by

hand after tightening the knife head bolt to be sure

the bearings rotate freely.

Knife drives should always rotate

counter-clockwise to keep the bot-

tom cap screw from coming loose.

Check the knife head bolts which attach the knife

head to the knife back daily. The bolts should be

tightened to 120 in lbs., (13.5 Nm), (9.96 ft lbs.)

NOTE!

Knife Drive Detail - Illustration A - Page 108 .

Knife Head Detail - Illustration B - Page 108 .

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 110