CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 88)

Page 86

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

- Store Hydraulic Tilt Link

19. Release all pressure on the hydraulic tilt

link, disconnect the hydraulic tilt link from the

swather, and place the cylinder in it’s storage

position.

20. For only 4995 and 4895 tables; if the hydraulic

tilt cylinder is used, you may remove the hitch

pin from the slotted lift link bracket to help

relieve the pressure for disconnection. It may

also be necessary to raise the table back up by

small amounts to release enough pressure to

disconnect the hydraulic cylinder.

• On all 4895 and 4995 windrowers, the hydraulic

cylinder is rotated 90° up against the windshield guard

and held in place with the small chain secured to the

windshield guard.

• On all A400 and R450 windrowers the hydraulic

cylinder is rotated 90° to the side and can be held in

place with a bungee if required.

Disconnect the safety chain if using a 4895 or 4995

swather.

Illustration B - Page 86

Illustration A - Page 86: Storing the 4895 & 4995

Hydraulic Link

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 88