CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 69)

Page 67

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

Connect Electrical and Hydraulic

Systems

1. Release the table lock, start the windrower engine and lower the table. Shut the engine

down and engage the parking brake. Ensure all moving parts have come to a stop before

exiting the cab.

2. Connect the electrical lines, and the

hydraulic reel lift/tilt hose (standard on all

tables) at the plug mount, located on the

right-hand side of the cab.

3. Open the valve to the reel lift/tilt cylinder

(curved arrow).

4. Connect hydraulics for Pressure, Return,

and Case Drain to the swather.

If you need to refer to hydraulic

schematics, see chapter “9 -

Hydraulics on page 97”

When the swather is being stored, the seperate

table case drain hose should be left connected

to relieve pressure in the closed hydraulic

system, thus avoiding potential damage to

system components.

For 2010 and newer tables, the forward side of the pump will be used instead of

the reverse side of the pump.

Illustration A - Page 67

Power Unit

Connections

Illustration B - Page 67

Hydraulic Connections

NOTE!

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 69