CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 114)

Page 112

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

8 - Leveling

The swather is attached to the windrower by one upper suspension link (Hydraulic Top Link) and

two lift arm assemblies which slide onto the lift arms of the windrower. The top link adjusts the

forward angle of the table. This adjustment affects the angle of the cutter bar in relationship to the

ground.

All of the swathers (A400, R450, 4895, and 4995) come standard with the Hydraulic Top Link. The

4895 and 4995 swathers also come with the manual top link which can be used if desired.

Leveling Link

The leveling link is used to connect the right side lift

arm to the Rock Shaft, this helps keep both lift arms

aligned.

1. Turn the bolt indicated

(a) to adjust the length of

the leveling link.

2. Lock the leveling link in

place with the indicated

nut (b).

Forward Angle Adjustment – Manual

Top Link

1. Loosen lock tab on the top link. With a

suitable size rod, turn top link clockwise to

tilt swather back, counter-clockwise to tilt

swather forward.

2. Re-tighten lock tab once the desired swather

angle has been reached.

Illustration A - Page 112 .

(a)

(b)

Leveling Link - Illustration B - Page 112 .

Adjusting the Manual Lift Link -

Illustration C - Page 112 .

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 114