CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 57)

Page 55

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

A400 & R450 Windrower Controls

Basic function controls are located on the

F-N-R lever and cab console.

Throttle rpm (mid), reel speed, draper

speed and oat are adjustable by means

of a rotary adjuster knob when selected.

See your John Deere windrower manual for

more information.

There is a short delay from the time you press the Reel Lift or Platform Tilt buttons to

the time that the table responds.

Leveling Link Installation

1. Remove the Leveling Link that came

with the Power Unit. Take note of the

length of this link.

2. Adjust the head of the adjustment bolt

on the Honey Bee Leveling Link until

the link is the same length as the initial

link. Lock the length in place with the

lock nut.

3. Install the Honey Bee Leveling link

onto the right side lift arm on the power

unit as shown. Use the pins and

washers that were removed from the

initial link, to secure the Honey Bee

Link in place.

In Cab Controls - Illustration B - Page 55 .

Adjust Throttle

Adjust Float

Press halfway down to display Knife speed.

Press completely down to adjust Reel speed.

Platform

Tilt & Lift

Rotary Adjuster

-Clockwise - Increase

-Counterclockwise - Decrease

Draper Deck Positions

Reel Lift &

Fore/Aft

Diagnostics

Adjust Draper Speed

Leveling Link

Illustration A - Page 55

Lock

Nut

Adjustment

Bolt

NOTE!

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 169 170

Comments to this Manuals

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 57

Comments to this Manuals

Related products and manuals for Vacuum cleaners CANVAC Q CLEAN R450