CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 80)

Page 78

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

4 - Operation

Initial Start-up

Keep bystanders, especially children, away from the machine during these

operations.

Before attempting these steps, complete the mounting checklist to assure the

swather is securely mounted, and be familiar with all cab controls.

1. Unlock the lift arms by disengaging the platform

lock as per windrower manual.

2. Start the windrower (see operators manual) and

lower the swather to the ground.

Engage the parking brake on the

windrower, shut the engine down, and

wait for all moving parts to stop before

leaving the cab.

3. With the swather completely lowered, (in full contact with the ground) inspect the swather for

damaged or loose parts, nuts and bolts. Repair or replace any such parts as required.

4. Check hydraulic reservoir oil level on the windrower. Fill to recommended level according to

instructions in windrower owner's manual.

5. Ensure that all protective shields are in place and properly secured.

6. Check that transport/gauge wheel tires are inated to the recommended pressure of 65 psi.

(449 kPa).

7. Check all hydraulic hoses and ttings to be sure they are tight, properly connected, and

that no hose damage has occurred during mounting. Repair or replace any damaged parts

before re-starting the machine.

Do not operate this machinery with defective hoses or ttings. Ensure hydraulic

pressure is released before checking or attempting repairs. Pressurized

hydraulics can cause serious injury.

8. Lubricate the swather. See service points in the Lubrication section of this manual.

9. Restart the windrower (see windrower Operators Manual). Engage the Park Brake.

Illustration A - Page 78

Platform Lock

- In Lock Position

WARNING

IMPORTANT

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 80