CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 37)

Page 35

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

5. From the port #1 of the valve assembly, install a 6MF–8MB 90º elbow to a 13 inch 6FFX–6FFX

hose, to a 6MB–6MF 90º elbow, which is then connected to the quick coupler levered valve as-

sembly.

6. On the tilt pressure hose, install a ¼ inch female quick coupler and dust cap. Install a swivel

adapter (6MB-6FFX), and 6MF-8 MB nipple to the valve Assembly port #2.

7. From the valve assembly port #3, connect a 6MF–8MB 90º elbow to a 6MF–6FFX 90º elbow, to a

6MB–6FFX swivel adapter, to a ¼ inch male quick coupler and dust plug. This assembly will then

be connected to the 66 inch hose assembly.

8. From the Rod end of the cylinder, install a 66 inch 6FFX–6FFX hose with a 6MB–6MF nipple. On

the other end of the hose install a ¼ inch female quick coupler with a 6MB–6MF nipple plus dust

plug.

9. On the return hose, install a 1/4" male quick coupler and dust cap. Install a 6MB - 6MB nipple to

the tilt cylinder (piston end).

Illustration A - Page 35: Wiring Bracket - Installed

Refer to page page 141 for details on identifying hydraulic ttings.

Refer to Install Tilt Cylinder Quick Couplers on page page 26 for proper power

unit quick coupler installation. A schematic can be found on page page 153 .

NOTE!

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 37