CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 65)

Page 63

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

9. All 4895 and 4995 tables require that

you secure the safety chain as shown.

The chain is supplied with a bolt

through one end of the links to mark the

minimum length of chain to be used. Do

not remove this bolt!

10. All 4895 and 4995 tables require that

you connect the hydraulic tilt cylinder

to the lower hole on the bracket on the

table as shown to the right.

Do not attempt to lift the swather

until the safety chain is attached.

If lining up the cylinder is difcult,

carefully raise the swather by small

amounts until it aligns.

11. Remove Pin 1 to allow the cylinder mounting

bracket to swivel up and down. Secure

the hydraulic tilt cylinder to the bracket as

shown. Install the hitch pin (Pin 2) to nish

connecting the cylinder to the table. Do not

try to reinstall Pin 1 yet, since the holes won't

be lined up.

12. Start the windrower.

13. Carefully raise the swather to full height, then

lock the arms, using the windrower's lock

lever.

Illustration B - Page 63

Pin 2

Pin 1

Illustration C - Page 63

Lock Lever

DANGER

NOTE!

Illustration A - Page 63: 4895/4995

Safety Chain, Hydraulic Tilt

Windshield Guard

Hydraulic

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 65