CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 68)

Page 66

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

Store the Transport Hitch

1. The swather should still be lifted from the

ground at this point, with the table safety

lock in place.

2. Fully retract the jack leg, by turning the

jack handle, and by collapsing the lower

section to the rst hole.

3. Release the hitch clamp, and slide the

jack off the hitch mount. Store the jack as

shown in Illustration “C”, and tighten the

clamp.

4. Pull the Lock Pin on the hitch tube and

slide the tube into the storage sleeve.

Refer to Illustration “A”. Attach the hitch

safety chain to the storage stub as shown

in Illustration “C”.

If excessive vibration occurs,

extend the jack until it contacts

the hitch tube storage sleeve,

as shown.

Illustration A - Page 66

Illustration B - Page 66

Remove Jack

Illustration C - Page 66

NOTE!

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 68