CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 92)

Page 90

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

Reel Arm Leveling and Height

Adjustment

Reel Height Adjustment

Swathers are equipped with adjustable reel height

stops, which limit how much the reel can be lowered.

These stops are located behind the reel lift cylinders,

and use course adjustment lock pin holes and a ne

adjustment threaded tube.

To adjust the height limits:

1. Start the power unit, and with the swather fully

lowered, raise the reel to maximum height.

2. Engage the emergency brake, shut power unit

down, and allow all moving parts to come to a

complete stop before exiting the cab.

3. Move Reel Height Stop in left side Reel Height

Control arm into the desired location (hole).

Fully insert Stop into the arm and orientate at

side down. Ensure that lock pin is fully installed

and locked in place with the safety clasp.

Perform ne adjustment to height by turning

the Adjuster Tube either clockwise or counter-

clockwise and securing in place with lock nut.

Take note of the exact hole location of the lock

pin, and thread count underneath the lock nut.

4. Repeat this procedure for right side of the

swather, ensuring that lock pin is inserted at the

same hole location height as the left side, and

the thread count matches.

5. Restart power unit, and slowly lower the reel to

it’s lowest position. Ensure the reel tines will not

contact any part of the deck, draper, or cutter

bar.

If slightly different heights for each end are desired, perform ne adjustment only,

keeping the lock pin hole locations the same on both ends.

When servicing the reel, it is necessary to have the reel locked into the

servicing (highest) position, with the lock pins securely in place.

Illustration A - Page 90

Reel Height Stop

Illustration B - Page 90

Ill C - Page 90 .

NOTE!

WARNING

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 169 170

Comments to this Manuals

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 92

Comments to this Manuals

Related products and manuals for Vacuum cleaners CANVAC Q CLEAN R450