CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 128)

Page 126

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

Double Swath Option – 21, 25, 30,

and 36 Foot Tables

Most Honey Bee Swathers can be equipped with a

double swath option. This option allows the operator

to lay two swaths. The rst swath will be delivered

to the opening on the right end of the swather. On

the next round, the decks can be shifted to the right,

creating an opening on the left end of the swather.

This places the second swath beside the rst. This

option is useful in light crop conditions.

The decks are shifted using hydraulic motors

activated by an electric solenoid on the selector

valve.

The solenoid selector valve reverses the ow

through the output ports when activated.

The deck shift motor and the draper motor are

connected in parallel, so that when the deck arrives

in its new position, the deck shift motor stops and

the draper motor will be running in the opposite

direction.

The deck shift roller chains are located on the back

of the rear panel.

Adjuster bolts at either end of the chain are used to

adjust tension.

The chains should not have too much slack, nor

should they be too tight.

Excess tension will cause the decks to warp.

Deck Shi System - Illustration A - Page 126 .

Roller Chain Tensioner - Illustration B - Page 126 .

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 128