CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 129)

Page 127

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

Deck shift stops are installed on each chain. Before

adjusting these stops, determine how much the deck

needs to be shifted. Then move the appropriate

stop.

To have a deck move further/less to the left, the right

hand stop will need to be moved, conversely, for the

deck to move further/less to the right, the left hand

stop will need to be moved.

The stop should be set so that the deck does not

hit against the other draper decks or the swather

frame. Allow approximately 1" of space between the

extreme points of the decks.

Check all hose clearances on hydraulic motors after

shifting the deck, to ensure they are not pinched or

stretched.

Check draper tracking and adjust if required. See

Draper Adjustment section of this manual for

assistance.

When shifting the deck for the double swath option, you must disconnect the

cross auger motor from the hydraulic circuit using the quick couplers provided.

The cross auger motor is connected in series with the draper motor, therefore

the hydraulic lines will become damaged if the draper motor is moved while still

connected to the cross auger motor.

DANGER

Deck Shift Stops-

Illustration A - Page 127 .

Deck

Setting Deck Gap-

Illustration B - Page 127 .

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 129