CANVAC Q CLEAN R450 Operator's Manual Page 130

  • Download
  • Add to my manuals
  • Print
  • Page
    / 170
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 129
Page 128
Rev. 02 - 94753
Honey Bee Manufacturing Ltd.
2014 John Deere WS Swather
Operators Manual and Reference Guide
Junior Deck Option – For Swathers With the Double Swath Option
When using the double swath option, the Jr. Deck
can be installed on the far right hand side of the
swather to move the swath away from the standing
crop. This leaves a larger gap between the swaths.
The Jr. Deck can be left on the swather when single
swath delivery is required, but will leave a narrower
swath.
The Jr. Deck is easily removed if a wider swath is
required.
Draper Extension for Swathing
When swathing in light crop conditions, it may be
necessary to narrow the opening in order to lay a
tight swath. One option is to add the 14 inch deck
extension kit to the idler end of a deck, and add to or
replace the existing draper with a longer one.
1. Remove the connector bar and open the
draper to expose the idler roller.
2. Remove the lock nut and washer that hold the
idler plate in place.
3. Remove the idler plate, idler roller, and xed
end.
4. Install the 14” back panel to the 14” extension
deck.
5. Install extension deck and back panel onto
the end of the deck being extended.
6. Install the front connector and the rear
connector.
7. Install the xed end, idler roller, and idler
plate.
8. Join the 30” draper extension to the regular
draper with a connector bar.
9. Wrap draper around the rollers and connect
ends together with the connector bar.
10. Adjust draper tension and tracking.
Jr Deck - Illustration A - Page 128 .
Idler Roller Removal - Illustration B -
Page 128 .
Fixed
End
Idler Roller
Idler Plate
Lock Nut
Eye
Bolt
Deck Extension Kit - Illustration C - Page 128 .
Connector
Bar
Draper
Back
Panel
Extension
Connection
Pieces
Page view 129
1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 169 170

Comments to this Manuals

No comments