CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 43)

Page 41

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

4. Locate the manual oat release valve and

relieve the pressure by opening the valve

(counter clockwise).

Ensure that you open the

valve prior to disconnecting

any hoses to avoid excess

spillage or potential harm from

heated oil.

The following sequence will minimize oil

spillage.

5. Disassemble the needle valve knob from

the body and reassemble using the panel

nut and washer as shown. Install the sup-

plied hose “B.”

Units with serial numbers starting at 320001

and up will use the needle valve assembly

shown to the right in conjunction with non-

threaded “STC” ttings.

Units with serial numbers up

to and including 320000 will

require the threaded hose

ttings also included in the

installation kit, see Illustration

3-28: Needle Valve - Non-STC

Threaded Fittings on the fol-

lowing page.

Refer to Hydraulic Fitting

Naming Standards on page

page 141 for details on iden-

tifying hydraulic ttings.

Illustration A - Page 41: Needle Valve and Hydraulic

Control Block

NOTE!

Illustration B - Page 41: Needle Valve - STC Fittings

WARNING

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 43