CANVAC Q CLEAN R450 Operator's Manual download pdf (Page 87)

Page 85

Rev. 02 - 94753

Honey Bee Manufacturing Ltd.

2014 John Deere WS Swather

Operator’s Manual and Reference Guide

15. For all A400 and R450 tables only: Remove Pin

1 to allow the cylinder mounting bracket to swivel.

As long as the table is still fully raised, there won't

be any pressure on Pin 1.

16. Place the platform lock in the unlock position, as

shown previously and in the windrower operator's

manual.

17. Restart the windrower. Lower the swather until

the front transport axle wheel, transport screw jack

and hitch tube jack just touch the ground. The lift

arms should still be rmly set in the strut mounting

boots. Decrease the amount of oat pressure to

minimum to aid in lowering.

Shut the engine down and wait for all

moving parts to stop before leaving the

cab. Set the park brake.

Your transport axle mounting bracket

may look slightly different from what

is shown depending on your model of

swather.

18. Block transport axle tires so the swather will not

move once the windrower has been removed from

the swather.

Illustration A - Page 85

Pin 1

Pin 2

Illustration B - Page 85

CAUTION

NOTE!

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 169 170

No comments

CANVAC Q CLEAN R450 Operator's Manual Page 87